Shure PG14E

System technical specifications

• Compatible systems per frequency band (up to): 4
• Selectable frequencies: 10
• Auto Setup Features: No
• Audio Reference Companding: No
• Included Antennas: Internal 1/4-wave
• Antenna Options: No
• Receiver Network Ability: No
• PC Control: No
• Rack Hardware: Optional (URT)
• Case: Optional System Case
• Transmitter Display: Multi-color LED
• Receiver Display: Multi-color LED
• Battery, Endurance: 9V, > 8 h
• Environment: Small to medium stages

Further Technical Specs

PG4 Receiver

• Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ
• Audio Output Level Ref.
• +/– 33 kHz deviation with
• 1 kHz tone
• XLR connector (into 100K Ω load): –19 dBV, typical
• 1/4 inch connector (into 100K Ω load): –5 dBV, typical
• Sensitivity –105 dBm for 12 dB SINAD, typical
• Image Rejection >50 dB, typical
• Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.)
• Dimensions – PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.)
• Weight 241 grams (8.5 oz)
• Weight – PG88 429 grams (15.1 oz)
• Housing Molded ABS
• Power Requirements 12–18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply

PG1 Bodypack Transmitter

• Audio Input Level
• -10 dBV maximum at “mic” gain position
• +10 dBV maximum at 0dB gain position
• +20 dBV maximum at -10dB gain position
• Gain Adjustment Range 30 dB
• Input Impedance 1mΩ
• RF Transmitter Output 10 mW typical (dependent on applicable country regulations)
• Dimensions 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.)
• Weight 75 grams (2.6 oz.) without battery
• Housing Molded ABS
• Power Requirements One 9V alkaline or rechargeable battery
• Battery Life Up to 8 hours (alkaline)